Technical guidance on conditioning PA6 and PA66: material behaviour, processes and process design – with particular attention to part geometry, moisture distribution and function-critical features.
How to define the moisture condition a PA6 or PA66 part needs, choose a process on technical grounds and verify that the part has been conditioned correctly.
Filter by topic or search for a specific term.
4 articles plus the feature article above
Conditioning ProcessesIn focus
How to define the moisture condition a PA6 or PA66 part needs, choose a process on technical grounds and verify that the part has been conditioned correctly.
Published 22 October 2026
Polyamide & Materials
In glass-fibre-reinforced polyamide, part moisture content and matrix moisture content are not the same. Why the reference basis decides how a target value is assessed.
Published 20 July 2026
Process Optimisation
Why there is no single conditioning time for polyamide, and what part the chosen process plays in how long it takes.
Published 25 March 2026
Conditioning Processes
From a conditioning-system supplier's perspective, the article outlines the characteristics of conditioning with steam.
Published 17 December 2024
Conditioning Processes
From the perspective of a conditioning-system supplier, the article sets steam conditioning against immersing polyamide components in a water bath.
Published 17 December 2024
No matching articles
There is no article yet for this combination of search term and topic. Try a broader term or reset the filters.
Tell us about the material, the part and what it has to achieve – we will get back to you about your enquiry.
Or call us directly: +49 6233 35 20 42
